Proception PROMOD1 Modulator
Self-contained unit with integral mains power supply
Standard video and line-level audio inputs on SCART connector (adaptor for RCA phono supplied)
UK standard double-sideband (DSB) modulated output
Output UHF channel range 21 - 69, non-volatile
Standard video and line-level audio inputs on SCART connector (adaptor for RCA phono supplied)
UK standard double-sideband (DSB) modulated output
Output UHF channel range 21 - 69, non-volatile
£
29
Out of stock
Self-contained unit with integral mains power supply
Standard video and line-level audio inputs on SCART connector (adaptor for RCA phono supplied)
UK standard double-sideband (DSB) modulated output
Output UHF channel range 21 - 69, non-volatile push-button setting with anti-tamper feature
Standard loop-through RF connection with type F connectors
UHF AV modulator; ch 21-69; digital display; SCART input
A convenient cost-effective analogue modulator, useful wherever it is necessary to convert baseband AV signals into a UHF TV signal.
Typical applications include CCTV security, home distribution from DVD, etc. and connection of set-top boxes to older TVs without SCART inputs.
Improved design with higher audio sensitivity and better display visibility.
TV systems
UK System I (6 MHz sound-vision spacing)
Video input
1 V p - p (internal 75 ? termination)
Audio input
200 mV RMS for ±20 kHz peak deviation at 1 kHz
UHF output
Approx. 75 dBµV
Modulation spectrum
Double-sideband
RF loop-through bandwidth
47 - 862 MHz
Loop-through gain
Approx. 1.5 dB
Power requirement
230 V AC 50 Hz at approx. 4 W, supplied with fitted plug to BS 1363
Standard video and line-level audio inputs on SCART connector (adaptor for RCA phono supplied)
UK standard double-sideband (DSB) modulated output
Output UHF channel range 21 - 69, non-volatile push-button setting with anti-tamper feature
Standard loop-through RF connection with type F connectors
UHF AV modulator; ch 21-69; digital display; SCART input
A convenient cost-effective analogue modulator, useful wherever it is necessary to convert baseband AV signals into a UHF TV signal.
Typical applications include CCTV security, home distribution from DVD, etc. and connection of set-top boxes to older TVs without SCART inputs.
Improved design with higher audio sensitivity and better display visibility.
TV systems
UK System I (6 MHz sound-vision spacing)
Video input
1 V p - p (internal 75 ? termination)
Audio input
200 mV RMS for ±20 kHz peak deviation at 1 kHz
UHF output
Approx. 75 dBµV
Modulation spectrum
Double-sideband
RF loop-through bandwidth
47 - 862 MHz
Loop-through gain
Approx. 1.5 dB
Power requirement
230 V AC 50 Hz at approx. 4 W, supplied with fitted plug to BS 1363